7-Day JEE Main Practice Plan: Chapter-Wise Weightage & Priority List


A good 7-day plan puts the chapters that appear most often first, and it uses the week to revise, not to learn new things. Take two full mock tests, spend most of your time on high-frequency chapters in all three subjects, and keep the last two days light.
NTA does not publish official chapter weightage. The numbers below come from coaching institute analysis of past papers (2022 to 2026), so treat them as trends, not promises. Session 1 is expected in January 2027, but check the dates on the NTA website, jeemain.nta.nic.in.
JEE Main Exam Pattern: What the 7-Day Plan Is Built Around
Paper 1 (B.E./B.Tech) has 75 questions for 300 marks, with 25 questions each from Physics, Chemistry and Maths. You get 3 hours, and the exam is computer-based. Each subject has 20 multiple-choice questions (MCQs) and 5 numerical value questions.
Detail | Paper 1 (B.E./B.Tech) |
Total questions | 75 |
Total marks | 300 |
Per subject | 20 MCQs + 5 numerical |
All 5 are compulsory (no choice) | |
MCQ marking | +4 correct, −1 wrong, 0 unattempted |
Numerical marking | Recent guides say +4 and −1 here too. Confirm in the official 2027 bulletin. |
Time limit per subject | None. You split the 3 hours yourself. |
Wrong answers cost marks, so four wrong answers cancel one correct answer. This is why the plan stresses accuracy over attempting everything.
JEE Main Chapter-Wise Weightage 2027: Physics, Chemistry and Maths
Weightage means how many questions usually come from a chapter or group of chapters. The ranges below come from Competishun's analysis of papers from 2022 to 2026. Use them to decide where to spend your hours.
JEE Physics: High-Weightage Chapters
Mechanics and Electrodynamics together give more than half of Physics. Modern Physics adds another 13–15%.
Area | Share of Physics |
Mechanics | 30–32% |
Electrodynamics | 26–28% |
Modern Physics | 13–15% |
Heat & Thermodynamics | 10–12% |
Optics | 8–10% |
Waves & Oscillations | 5–7% |
The most repeated chapters are Current Electricity, Rotational Motion, Modern Physics, Electrostatics, and Thermodynamics. Together they give about 10–12 questions a year.
JEE Chemistry: High-Weightage Chapters
Chemistry splits almost evenly across three parts. Physical and Organic Chemistry each carry about a third, and Inorganic carries a little under a third.
Area | Share of Chemistry | Type of questions |
Physical Chemistry | 32–36% | Mostly numerical |
Organic Chemistry | 32–36% | Reactions and mechanisms |
Inorganic Chemistry | 28–32% | Mostly facts from NCERT |
Top chapters are Coordination Compounds, d and f Block, Chemical Bonding, Carbonyl Compounds (aldehydes, ketones and acids) and Equilibrium. Inorganic questions are often direct facts, so one careful NCERT read can win marks quickly.
JEE Maths: High-Weightage Chapters
Calculus, Algebra and Coordinate Geometry together give about two-thirds or more of the paper.
Area | Share of Maths | Difficulty |
Calculus | 25–30% | High |
Algebra | 22–28% | Moderate |
Coordinate Geometry | 16–20% | Moderate |
Vectors & 3D Geometry | 9–12% | Easy to moderate |
Trigonometry | 6–8% | Easy |
Probability & Statistics | 5–7% | Easy |
Top chapters are Definite Integration, 3D Geometry, Sequence and Series, Probability and Vectors.
How to read this data: These are averages over many shifts. A chapter with a low average can still bring 2–3 questions in your shift. Use the numbers to set the order of revision, not to skip whole topics.
Priority List: Which Chapters to Revise First, and Which to Skip
Revise high-frequency chapters that you can score in quickly first. Leave chapters that are rare or slow for the end. The tiers below are a study judgment based on the weightage data and the difficulty notes above. They are not an official ranking.
Tier 1, Tier 2 and Tier 3 Chapters
Tier 1 chapters come up often and you can score in them quickly.
Tier 2 chapters come up often but take more time per question.
Tier 3 chapters come up less often. Revise them only if time is left.
Tier | Physics | Chemistry | Maths |
1 | Current Electricity, Electrostatics, Modern Physics, Thermodynamics | Coordination Compounds, d and f Block, Chemical Bonding, Equilibrium | Definite Integration, 3D Geometry, Vectors, Sequence and Series, Probability |
2 | Rotational Motion, EM Induction, Magnetic Effects of Current, Capacitance, Optics | Thermodynamics, Solutions, Chemical Kinetics, Electrochemistry, Carbonyl Compounds | Differential Equations, Conic Sections, Limits and Continuity, Application of Derivatives, Binomial Theorem |
3 | Waves, Kinematics (revise formulas only) | Biomolecules, remaining organic and inorganic topics | Trigonometry, remaining Algebra and Coordinate Geometry topics |
For each chapter, revise in this order: formulas or reactions, then solved examples, then 10–15 past questions.
What Not to Study in the Last 7 Days
Do not start a new chapter unless it is Tier 1 and you have never opened it. A half-learned chapter rarely gives marks, and it eats the time you need for chapters you already know.
Skip these:
Tough, multi-step problems from advanced books. JEE Main is not JEE Advanced.
New books or new coaching notes.
Chapters you dropped months ago, if they are Tier 3.
Example: if you never studied Biomolecules, let it go. If you never studied Coordination Compounds, learn the basics. It is a Tier 1 chapter, and it pays well.
7-Day JEE Main Study Plan (Day-by-Day Schedule)
JEE Main Practice Plan runs in three blocks. Days 1–3 cover Tier 1 chapters, Days 4–5 cover Tier 2 chapters with full mocks, and Days 6–7 are for your mistakes and a light finish. Aim for 8–10 hours of focused study a day, including breaks.
Day | Physics | Chemistry | Maths | Practice |
1 | Current Electricity, Electrostatics | Chemical Bonding, Equilibrium | Definite Integration | 20 past questions per subject |
2 | Modern Physics, Thermodynamics | Coordination Compounds, d and f Block | 3D Geometry, Vectors | 20 past questions per subject |
3 | Quick formula pass of Day 1–2 chapters | Inorganic facts from NCERT | Sequence and Series, Probability | 90-minute mini test |
4 | Rotational Motion, Capacitance | Solutions, Kinetics, Electrochemistry | Differential Equations, Conics | Full mock + analysis |
5 | EM Induction, Magnetic Effects, Optics | Carbonyl Compounds, Thermodynamics | Limits, Application of Derivatives | Full mock + analysis |
6 | Error log + formula sheet | Error log + reaction sheet | Error log + formula sheet | 60-minute section test |
7 | Light revision of formula sheets | Light revision | Light revision | No new problems |
Days 1–3: Revise Tier 1 Chapters
Spend 3–4 hours per subject on Tier 1 chapters, and keep one hour each day for practice questions. Write a one-page formula sheet for every chapter as you finish it. You will use these sheets on Days 6 and 7.
On Day 3, use the first half for a quick pass over Days 1–2. Spend the second half on Tier 1 Maths chapters you have not yet covered.
Days 4–5: Tier 2 Chapters Plus Full Mocks
Take a full mock in the morning, in the same time slot as your real shift. Spend the afternoon on analysis, then use the evening for one or two Tier 2 chapters.
Analysis takes at least as long as the test, so give it two hours. Sort every wrong or skipped question into one of three groups: concept gap, calculation slip or bad guess. The group tells you what to fix.
Days 6–7: Error-Log Revision and Light Practice
On Day 6, go through your error log from the two mocks and re-solve every wrong question. Add the most common mistakes to your formula sheets. Do one short test of 60 minutes, so your speed stays warm.
On Day 7, read your sheets and stop early. Sleep for 7–8 hours. A tired mind makes the same calculation slips you worked on all week.
How to Adjust the Plan for Your Starting Level
Your mock scores decide how much of this plan you should follow. The table below changes the plan, not the topics.
Your situation | What to change |
Syllabus not finished | Cover only Tier 1 chapters you have never studied, then revise Tier 1 on Days 3–5. Skip Tier 3 fully. |
Mock scores under 100 | Spend Days 1–5 on Tier 1 chapters only. Take one full mock, on Day 4. Focus on easy questions and avoid guessing. |
Mock scores 100–150 | Follow the plan as written. Spend extra time on Tier 2 chapters where your error log shows repeated mistakes. |
Mock scores 150+ | Follow the plan, but add a third mock on Day 3 and spend more time on Maths speed. |
How to Use Mock Tests and PYQs in the Last Week
Take two full mocks in the last week, on Days 4 and 5. Use past year questions (PYQs) for chapter practice on Days 1–3. More than two mocks leaves too little time to learn from them.
For full mocks:
Sit at the same time of day as your exam shift.
Try one subject order, then keep it for the real exam. A common choice is Chemistry, then Physics, then Maths.
Do not stop to look at answers during the test.
For the error log: Keep one page per subject with three columns: question, why you missed it, and the fix. Read it again on Days 6 and 7. Most students repeat the same five or six mistakes, and this log shows you yours.
For JEE PYQs: Solve them chapter by chapter in the first three days, then use past full papers only if you finish early. Chapter-wise practice shows you the patterns in each topic.
Numerical Value Questions: A Last-Week Strategy
Each subject has five numerical questions, worth 20 marks in total. Attempt one only after you have reached a final number, and do not guess. Recent pattern guides say a wrong numerical answer also costs 1 mark, so confirm the rule in the official bulletin.
These chapters give many numericals:
Physics: Current Electricity, Thermodynamics, Modern Physics
Chemistry: Physical Chemistry topics such as Equilibrium, Solutions, Kinetics and Electrochemistry (Physical Chemistry is numerical-heavy)
Maths: Definite Integration, Sequence and Series, Probability
Practice tips:
Solve 5–8 numericals a day from your Tier 1 chapters.
Write each step on paper. A small error early gives a wrong final number.
Check units and decimal places, since the answer is typed into a box.
Last 24 Hours and Exam-Day Checklist
The night before, read your formula and reaction sheets and then stop. Do not start new problems. Pack your bag, check the route to the centre and sleep early.
The night before:
Read your one-page sheets once.
Keep your admit card and ID ready, along with anything else the admit card says to carry. Check the admit card on the NTA website for exact rules.
Skip heavy meals and late-night study.
In the exam:
You choose how to split the 3 hours. One common split is Chemistry in 45–50 minutes, Physics in 55–60 and Maths in 60–65. Try your split in the mocks first.
Take the sure questions in the first round and mark the doubtful ones to return to.
Keep the last 10–15 minutes for a check, especially of numerical entries.
If a question does not click in about two minutes, move on.
FAQs About JEE Main Practice Plan
Can I complete the JEE Main syllabus in 7 days?
No. Seven days is enough to revise chapters you have already studied, not to learn the whole syllabus. Cover Tier 1 chapters first, and do not start Tier 3 chapters you have never touched.
Which subject should I give the most time in the last week?
Give each subject a fair share, but spend a little extra on the one where your mock marks are lowest. Maths takes the most time per question, so protect time for it. Chemistry gives quick marks, especially in Inorganic.
How many hours should I study per day in the last 7 days?
Most students do well with 8–10 hours of focused study, including breaks. On Days 6 and 7, cut this down and keep your sleep. Rest helps your accuracy more than extra hours do.
Is chapter-wise weightage official?
No. NTA does not release official weightage. The figures come from coaching institutes that count questions from past papers, so numbers differ a little from one source to another. Use them as a guide.
Should I study new topics in the last week?
Only if the topic is Tier 1 and you have never studied it, such as Coordination Compounds. Skip everything else that is new. Your time is better spent fixing mistakes in chapters you already know.
How many mock tests should I take in the last week?
Two full mocks, on Days 4 and 5, are enough for most students. If you score above 150 in mocks, a third on Day 3 is fine. Always spend as much time on analysis as on the test itself.
Which chapters are safe to skip?
Tier 3 chapters, if time is short, such as Biomolecules in Chemistry or Waves in Physics. Do not skip Tier 1 chapters. If you have more time later, add Tier 3 chapters back in.
Is a 200+ score realistic with a 7-day plan?
It depends on where your mocks stand today. A week can fix mistakes and improve accuracy, but it cannot replace months of study. A score near 200 needs about 50 correct answers with almost no wrong ones. For example, 55 right and 5 wrong gives 215.
Conclusion
Start with Tier 1 chapters, spend Days 4–5 on Tier 2 chapters and two full mocks, and keep Days 6–7 for your error log and rest. Revise, do not learn, and protect your accuracy.
Your next step is simple. Take a full mock tomorrow, sort your mistakes into concept gaps, calculation slips, and bad guesses, and match the weak chapters against the tier table. Then begin Day 1.



Comments